2014年2月12日星期三

The Operation of the Roof Panel Forming Machine


In the roll forming machines for sale in the market, the rood panel roll forming machine plays a significant role in roof panel production. Now, I would like to introduce how to use the roof panel roll forming machine for you.
The operation tools are forming mould, diagonal cutting pliers, coil holder, and internal hexagonal wrench as well as mould clamp spice that is matched up the use of the drilling crew. After preparation, it is time to start the machine. Open the power supply of the injection molding machine. Turn the radio button to the manual direction. It is necessary to open and close at least five times to make sure the normal running of the motor to start the motor officially. And then start temperature control switch to adjust the temperature to set temperature to make it warm to normal working temperature. Next, check whether the circulation oil, gear oil as well as cooling water are normal. When the temperature is to the normal working temperature, start the motor.
Press the center to check whether the center is under the slide template and the micro switch is in place. Then press the slip form until the slip form touches the micro switch. Press the switch to close the mode, which is closure action. At first, it is high pressure compound die with fast speed, and when the micro switch touches it changes to buffer low pressure compound die with low speed. After finishing, adjust the route switches under the drilling crew in place and adjust the time of the high pressure timer to 8 to 15 seconds then open the mould, close the mould to check whether the machine act perfect operation and whether the pressure when closing mould can keep.
The matters that need to pay more attention to during operation of the roof panel roll forming machine are as follows.
First, when manual adjustment, it is necessary to prevent the foreign matters from entering into the mould to avoid crush the mould. And it is forbidden to put hands into the mould. It is necessary to check the temperature of the oil each hour to keep the temperature under 50℃. And if there are any unusual situations of the roof panel roll form machine, it is necessary to close down immediately to ask the maintenance personnel to maintain. And if it is quality problem, it is better to inform quality control personnel to deal with. In addition, remember how to use the roof panel roll forming equipment and clean the surrounding of the machine in regular time.